ENVIROLAB SDN. BHD.
10-G, Jalan Nautika B U20/B,
Pusat Komersial TSB, Sek U20,
40160 Shah Alam,
Selangor, Malaysia.
+603-6144 0868
+603-6151 7918

Multi-Range EC Meter

Previous 2 / 2 Next

Multi-Range EC Meter Multiparameter Water Quality Meter HANNA INSTRUMENTS


Features 

Four-ring Probe - The four-ring probe that comes with the HI8733 offers a versatile and accurate solution for conductivity readings. Four ring technology allows for a larger range of measurement within a single probe, whereas two probe technology is somewhat limited in the range in which it can measure. The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors.
 
Four Measurement Ranges - HI8733 offers four conductivity measurement ranges. Each range has a dedicated button on the face of the meter, allowing users to easily switch between ranges when necessary. The meter is programmed to let the user know when their current reading is out of range, and a new range should then be selected.
 
Automatic Temperature Compensation - Since temperature has such a dramatic effect on conductivity readings, having a meter that offers temperature compensated readings is invaluable. The probe of the HI8733 features a built-in temperature sensor that automatically accounts for the effects of temperature on a sample’s conductivity reading in the range of 0 to 50°C (32 to 122°F).
 
Adjustable Temperature Coefficient - As the temperature of a solution increases or decreases, the conductance becomes higher or lower, respectively. The temperature compensation coefficient, also known as β, is the factor that adjusts for the temperature of a solution to ensure an accurate reading is achieved. The HI8733 allows for an adjustable β to be set from 0 to 2.5%/°C; this factor corrects the conductivity reading by the set percentage for each degree Celsius change in the sample.
 
One-point Calibration -  The HI8733 can be calibrated at one point in a standard conductivity solution. The calibration knob located on the top of the meter is easily adjusted to the correct calibration standard.

Specification 

Specification Name Detail
SKU HI8733
EC Range 0.0 to 199.9 μS/cm; 0 to 1999 μS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
EC Resolution 0.1 μS/cm; 1 μS/cm; 0.01 mS/cm; 0.1 mS/cm
EC Accuracy (@25°C/77°F) ±1% FS (excluding probe error)
EC Calibration manual, one-point through EC knob
Temperature Compensation automatic, 0 to 50°C (32 to 122°F) with β adjustable from 0 to 2.5%/°C
Power Supply 2 x 9V alkaline batteries
Power Consumption approximately 100 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 146 x 80 x 36 mm (5.7 x 3.1 x 1.4”)
Weight 231 g (8.1 oz)
Ordering Information Supplied with HI76302W conductivity probe, 12880 μS/cm HI70030 calibration solution sachet (1), battery, and instruction manual.
Warranty 2 years
Recommended Probe HI76302W conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3’) cable (included)

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  


Switch to Mobile Version
Subscribe Newsletter